Jitterbug Sanders (88.9x165mm, 9000rpm, Non-Vacuum),and can be widely used for for sanding of metal and body filler, rust removal, and virtually all automotive smoothing of surfaces.
|Product Weight||3.93lbs/1.78kgs||Product Length||6.5”/165mm|
|Average Air Consumption 25%||4.5 CFM||Air Inlet Thread Size(NPT)||1/4”|
|RPM (Free Speed)||9000||Body Material||Composite|
|Air Pressure||90PSI/6.3KG/CM2||Recommended Hose Size||3/8”(10mm)|
|Air tools size(L*W*H)||165mm*90mm*120mm|
1. Balanced ball bearing construction for vibration-free performance.
2. Recommended for wet or dry sanding on boats,cars and truck.
3. Compact palm-grip for one hand operation.
4. Muffled rear exhaust for quiet operation.
5. Four post motor housing support.
6. Heavy duty positive locking clamps for tight paper retention.
7. Constant 3/16" orbital stroke for fine finishing.
8. Built-in regulator for positive speed control.
9. Steel end plated for long tool life.
10. Performance @ 90 PSI. Air Inlet NPT 1/4". Min Hose Size 3/8"
- Air Impact Wrench
- Air Ratchet Wrench
- Air Die Grinder
- Air Cut Off
- Air Drill
- Air Sander
- Air Hammer
- Air Tire Grinder
- Air Angle Grinder
- Air Screwdriver
- Air Body Saw
- Air Scissor
- Air Blow Gun
- Air Tool Kit
- Hammer Needle Scaler